AFWFilters Fleck 5600 Installation Instruction page 15

Reserve
RS
Selection
Saftey
SF
Factor
Reserve
RC
Capacity
Day
DO
Override
Percentage saftey factor - this uses a
percentage of the capacity for a reserve.
SF
Softener systems only. A fixed reserve is
volume for a reserve. Softener systems
>rc<
only. This is the recommended setting
Only applies to softeners with RS set to
0-50%
Fixed reserve capacity, softeners only.
This is the number of gallons the system
reserves as a saftey factor to ensure the
system will treat the water until the
next regeneration. It is commonly set to
-1-(half of
the average number of gallons used in a
calulated
day. If you are unsure of your actual
capacity)-
usage, a good rule of thumb is to set it
to the number of people in the house
times 75. Example, if there are 4 people
in the house, you would set it to 300
This setting will start the regeneration
cycle after the set number of days
regardless of water usage. Typically set
-14- to 14 or less to ensure the resin gets
lifted and cleaned off regularly. This
ensures effective filtration and long
15 of 28
recommened over this setting.
Fixed reserve capacity - uses a set
for softeners.
gallons (4x75).
resin life.
SF