Specifications; Specification Information - Pedigo P-2147 Operator's Manual

Combination blanket/fluid warmer
Hide thumbs Also See for P-2147:
Table of Contents

Advertisement

Specification Information

Transportation and
storage conditions
Operating conditions
Standards for
electrical equipment
C om bi n a t i on B l a n ket / F lu i d W a r mer
Weight
Storage cavity capacity
Temperature range
Clearance
requirements
Ambient temperature range of -40°F to +159°F (-40°C to +70°C).
Relative humidity range of 10% to 95%, non-condensing.
Atmospheric pressure range of 7.25 psi to 15.37 psi (50kPa to 106kPa).
The warmer must acclimate to the room temperature it will be placed—24 hours
is recommended.
The recommended environmental temperature range is 60°F to 90°F
(15°C to 32°C).
The recommended relative humidity is above 20%, non-condensing.
Medical equipment classified by Underwriters Laboratories with respect
to electrical shock, fire, and mechanical hazards only, in accordance with
UL 61010-1 and CAN/CSA C22.2 No. 61010-1.
Grounding reliability can only be achieved when the appliance is
connected to an equivalent receptacle marked "Hospital Grade."
IEC 60601-1-2
IP-XO ordinary
O pe ra t o r ' s M a n ua l
MN-39 930
Net: 457 lb (207 kg)
Ship: 568 lb (258 kg)
Fluid cavity: 30 1-liter bottles or 24 1-liter bags
Blanket cavity: 30 blankets (13 ft
Irrigation fluids (IRR):
90°F to 150°F (32°C to 66°C)
Injection fluids (INJ):
90°F to 104°F (32°C to 40°C)
Blanket: 90°F to 160°F (32°C to 71°C)
4" (102mm) from rear
1" (25mm) from top
2" (51mm) from sides
1/2" (13mm) from bottom
Re v 1
3/19
S
PECIFICATIONS
3
)
E471516
Protective Earth
Ground Symbol
13

Advertisement

Table of Contents
loading

Table of Contents