What to do if a Power Interruption Occurs
Background
Procedure
Result
C om bi n a t i on B l a n ket / F lu i d W a r mer
You may need to reset the warmer in the case that a power interruption occurs.
When the power is restored, the ON/OFF status indicator LED decimal
flashes
.
LED
The controller stores all settings and continues operation using these settings in
the event of a power interruption.
To continue operation of the warmer, do the following.
Step
Action
1.
Press
the ON/OFF button
The LED goes out.
NOTE:
power interruption in hours and minutes (hh:mm) for five
seconds. Then, the screen displays the set-point
temperature.
2.
Make sure
the fluids and blankets are at the correct temperature before
using.
Resume operation of the warmer.
O pe ra t o r ' s M a n ua l
MN-39 930
▪
▪
.
The screen displays the length of time of the
Re v 1
3/19
▪
▪
T
ROUBLESHOOTING
35