Nk8000 Application Examples; Local System - Siemens DMS8000 Applications And Planning Manual

4

NK8000 Application examples

4.1

Local system

Stand-alone setup
+ NK8210 driver
Siemens Building Technologies
Fire & Security Products
Most of the sites where a management station is installed are local systems.
Examples for local systems are:
–
Hotels
–
Office buildings
–
Shopping centres
–
Public buildings (such as museums)
The following figure shows the various subsystem connections of an NK8223 in a local
system.
MM8000
Fig. 29 Example of a local system
The management station is connected via TCP/IP LAN to the NK8223/NK8225 for the
centralisation of:
–
CF9000 I/O System (RS485 party lines for multiple units (directly connected or via
IC-2 converter);
–
CCTV SIMATRIX crossbar or Philips-Burle;
–
Cerloop network via MK7022 (CS11 AlgoRex, CZ10, STT11, STT20, STT2410
(Système de Télécommande et Télésignalisation), CC60 (Gas), CS440, CS4,
CZ12 intrusion control units, and DMS7000 units);
–
Up to 4 CS6 Guarto units on the LON line;
–
Serial connection to CS11 AlgoRex, FC700A, SIGMASYS, D100, CZ10, CC60
(Gas), SI410/420 Sintony, CS440, CS4, and CZ12 intrusion control units.
Optionally, DF80xx modules for up to 16 digital inputs, 8 relay outputs, or power
supply supervision can also be installed on the local I
DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
NK8000 Application examples
MM8000
Stand-alone setup
+ NK8210 driver
LON
2
C bus.
...up to 4 hosts
55
06.2007