Nk8000 Network Configurations; Dms8000 Multiple Host Configuration - Cmsdl/Ip; Dms8000 Multiple Host Configuration - Bacnet/Ip - Siemens DMS8000 Applications And Planning Manual

Management level configurations
2.2

NK8000 network configurations

DMS8000 Multiple host configuration – CMSDL/IP
2.2.1
DMS8000 multiple host configuration – BACnet/IP
2.2.2
18
Building Technologies
Fire Safety & Security Products
NK8000 safety and security networks are supported by MM8000 and MK8000 MP4.10
in the configurations described in section 2.1 (up to four hosts). Additionally, the
NK8225 supports BACnet subsystem connectivity for up to fours hosts for MM8000 /
MK8000.
Characteristics:
–
Communication layer equipped with NS8210 Network driver
–
Up to four hosts
Fig. 5 NK8225 DMS8000 CMSDL multiple host configuration
Characteristics:
–
Communication layer equipped with NS8011 BACnet Network Driver for
DMS8000
–
Conversion of native protocols to BACnet (CS11 AlgoRex, FC700A, SIG-
MASYS/D100, SI410/420 Sintony, CS6 Guarto) in NK8225
–
Up to four DMS8000 hosts
Fig. 6 NK8225 DMS8000 BACnet multiple host configuration
Note: CS11 AlgoRex connectivity direct or via Cerloop.
DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
06.2007