Subsystems Connected Via Rs485 Interface; Subsystems Connected Via Lon Interface - Siemens DMS8000 Applications And Planning Manual
Mp4.10 for mm8000 management station; mk8000 opc server; mt8001 management terminal; nk8000 networks
Hide thumbs
Also See for DMS8000:
- Application & planning (96 pages) ,
- Manual (46 pages) ,
- Connectivity manual (44 pages)
Table of Contents
Advertisement
3.4.2.2 Subsystems connected via RS485 interface
3.4.2.3 Subsystems connected via LON interface
Siemens Building Technologies
Fire & Security Products
The following control units are supported:
Siemens CF9000 I/O systems (CF9003, DF8020, DF8040, DF8045, DF8046 mod-
ules)
Fig. 26
Example of a subsystem connected via RS485 interface
Note: The serial interface COM1 can be configured either as RS232 or RS485 inter-
face. This configuration requires hardware revision E or later.
The following control units are supported:
Siemens CS6 Guarto intrusion detection systems (up to 4 CS6)
Fig. 27
Example of subsystems connected via LON interface
DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Automation level configurations
51
06.2007
- Quick Links:
- Cs1115 / Fc330A Direct Configuration
Hide quick links:
Advertisement
Table of Contents
