Siemens DMS8000 Applications And Planning Manual page 13

Siemens Building Technologies
Fire & Security Products
NK8222
 1 serial connection supporting a single fire, gas, intrusion detection, CCTV, or a
digital I/O system
Or
 LON adapter for connecting 1 CS6 Guarto intrusion detection system
NK8223
 Up to 4 serial connections supporting fire, gas, and intrusion detection systems,
CCTV, and digital I/O's
And
 LON adapter for connecting up to 4 CS6 Guarto intrusion detection systems
NK8225
 Same capabilities as NK8223
 BACnet connectivity (native protocol conversions) supporting CS11 AlgoRex,
FC700A, and SIGMASYS/D100 fire, and CS6 Guarto and SI410/420 Sintony
intrusion detection systems
NK8222, NK8223
 TCP/IP on Ethernet connectivity for connection to local and remote management
stations. Transport protocol CMSDL/IP or CEI79-5 featuring 64-bit encryption
(FEAL algorithm) for high security banking applications, and support of switched
lines;
 Simultaneous multiple host connectivity (up to four) using CMSDL/IP protocol (with-
out encryption);
 Upstream serial connectivity to a local management station (MM8000 / MK8000 /
MT8001) using an RS232 line via CMSDL serial protocol;
 The upstream devices (MM8000 or MK8000) must be equipped with the NS8210
Network Driver for TCP/IP on Ethernet connectivity or with the NS8012 CDI-Net
Driver for serial connectivity.
NK8225
 Same as NK8222, NK8223 above
 BACnet/IP on Ethernet connectivity for connection to local and remote DMS8000
management stations;
 Conversion of native protocols (CS11 AlgoRex,, FC700A, SIGMASYS/D100,
SI410/420 Sintony, and CS6 Guarto) to BACnet;
 Enhanced network-wide interaction machine
tween subsystems connected to other NK8225s (CS11 AlgoRex, FC700A, SIG-
MASYS, D100, CS6 Guarto, Sintony SI410/420)
 The DMS8000 upstream devices (MM8000 or MK8000) must be equipped with the
NS8011 Network Driver for BACnet/IP on Ethernet connectivity, the NS8210 Net-
work Driver for TCP/IP on Ethernet connectivity, or with the NS8012 CDI-Net Driver
for serial connectivity.

*
See more about interactions in section 4.4.
DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Products concept
*
supporting logical combinations be-
13
06.2007