The Extended Menu "Advanced Menu - Sennheiser ew 100 G3 Series Instruction Manual

All manuals and user guides at all-guides.com
Adjusting settings via the operating menu
The extended menu "Advanced
Setting transmission frequencies and the frequency bank "U" –
"Tune"
When you have selected one of the system banks and then select
the "Tune" menu, the plug-on transmitter automatically switches
to channel 1 of the frequency bank "U". In this case, "U.1" briefly
appears on the display panel. Upon delivery, the channels of the
frequency bank "U" are not assigned a transmission frequency.
When you are in the "Tune" menu item, the RF signal is
deactivated.
Via the "Tune" menu item, you can set a transmission frequency to be
stored in the current channel or you can select a different channel in the
frequency bank "U" and assign it a transmission frequency.
It is vital to observe the notes on frequency selection on page 17.
Setting a transmission frequency for the current channel
Press the UP/DOWN button until the "Tune" menu item
appears.
Press the SET button.
SET
The frequency selection appears.
SET
Advanced Menu Tu n e
543 .200 MHz
Tune
B.Ch:
Call up "Tune" Select the MHz
value and confirm
"Stored"
Set the desired frequency.
Press the SET button.
SET
Your settings are stored.
You are back to the operating menu.
Selecting a channel and assigning this channel a frequency
Press the UP/DOWN button until the "Tune" menu item
appears.
Keep the SET button pressed until the channel selection
SET
appears.
SET
Advanced Menu Tu n e
548.200 MHz
Tune
B.Ch: U.
548.200 MHz
Call up "Tune" Select the channel;
(special function) store the setting
Set the desired channel.
Press the SET button.
SET
The frequency selection appears.
Set the desired frequency.
Menu"
SET
Tu n e
548.200 MHz
U. 1 B.Ch: U. 1
Select the kHz
value; store the
setting
SET
SET
Tu n e
548 .200 MHz
1 B.Ch: U. 1
Set the frequency
15