The Extended Menu "Advanced Menu - Sennheiser SKP 100 Instruction Manual

Adjusting settings via the operating menu
When setting up multi-channel systems, please observe the following:
Only the factory-preset frequencies within one frequency bank are inter-
modulation-free (see page 17). Plug-on transmitter and receiver of a
transmission link have to be set to the same frequency. It is vital to
observe the notes on frequency selection on page 17.
Entering a name – "Name"
Menu
Name
L i c h a e l
Call up "Name"
Via the "Name" menu, you can enter a freely selectable name (e.g. the
name of the performer) for the plug-on transmitter.
The name can be displayed on the standard displays "Frequency/Name"
and "Name/Channel". The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Press the
character.
Press the
SET
character or to store the complete entry.
Activating/deactivating the automatic lock mode – "Auto Lock"
Menu
Auto Lock
A c t i v e
Call up "Auto
Lock"
The lock mode prevents that the plug-on transmitter is accidentally
switched off or programed during operation. The lock mode icon
the current standard display indicates that the lock mode is activated.
Press the
desired setting.
For information on how to use the lock mode, refer to page 9.
The extended menu
Setting transmission frequencies and the frequency bank "U" –
"Tune"
When you have selected one of the system banks and then select the
"Tune" menu, the plug-on transmitter automatically switches to channel 1
of the frequency bank "U". In this case, "U.1" briefly appears on the display
panel. Upon delivery, the channels of the frequency bank "U" are not
assigned a transmission frequency.
Via the "Tune" menu item, you can set a transmission frequency to be
stored in the current channel
frequency bank "U" and assign it a transmission frequency. It is vital to
observe the notes on frequency selection on page 17.
When you are in the "Tune" menu item, the RF signal is
deactivated.
14
SET
Name
L i c h a e l
Enter a character
and confirm
"Stored"
UP button (
SET button to change to the next segment/
SET
Auto Lock
Active
Select the desired
setting
"Stored"
UP button ( )/DOWN
"Advanced
or you can select a different channel in the
SET
)/DOWN button ( ) to select a
button ( ) to select the
Menu"
Name
Michael
Enter a character;
store the entry
SET
Auto Lock
I n a c t i v e
Store the setting
SET
on