Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rohde & Schwarz RT-ZF7
Summary of Contents for Rohde & Schwarz RT-ZF7
- Page 1 ® R&S RT-ZF7 Automotive Ethernet T&D Fixture Manual (B1Yè2) 1801419002...
- Page 2 This manual describes the R&S RT-ZF7 Automotive Ethernet triggering and decoding test fixture (1801.3688.02). © 2019 Rohde & Schwarz GmbH & Co. KG Mühldorfstr. 15, 81671 München, Germany Phone: +49 89 41 29 - 0 Fax: +49 89 41 29 12 164 Email: info@rohde-schwarz.com...
-
Page 3: Safety Information
® Safety Information R&S RT-ZF7 Safety Information The product documentation helps you to use the product safely and efficiently. Keep the product documentation nearby and offer it to other users. Safety information warns you about the potential dangers and gives instructions how to prevent personal injuries or damage caused by dangerous situations. -
Page 4: Product Description
R&S RT-ZF7 Board Description Product Description The R&S RT-ZF7 automotive Ethernet T&D fixture is a product for triggering and decoding of the 100BASE-T1 and 1000BASE-T1 standard. It is used in combination with: ● R&S RTO/R&S RTP oscilloscope ● 100BASE-T1: R&S RTO-K57 (1333.0596.02), R&S RTP-K57 (1800.6548.02) For data, see the "R&S RT-ZFxx Oscilloscope Test Fixtures - Specifications"... - Page 5 ® Product Description R&S RT-ZF7 Board Description X1, X2, X3, X4 Connectors for Ethernet device under test (DUT). X113 Connector for an oscilloscope, negative signal from X2 to X4 (forward signal). X114 Connector for an oscilloscope, negative signal from X4 to X2 (reverse signal).
- Page 6 ® Connecting the Board R&S RT-ZF7 Connecting the Board Test setup 1. Connect the Ethernet devices to the SMA plugs ( X1, X2, X3, X4) on the sides of the fixture. 2. Connect the oscilloscope channels to the FWD and / or REV SMA plugs (X113, X114, X115, X116).
Need help?
Do you have a question about the RT-ZF7 and is the answer not in the manual?
Questions and answers