Genlock Adjustment; Horizontal Phase Adjustment - Panasonic AW-UE150WP Operating Instructions Manual

Genlock adjustment

The genlock adjustment is performed to achieve phase alignment by
applying external synchronization (genlock) when a multiple number of
cameras will be used or when the unit will be used in combination with
other devices.
This unit supports BBS (Black Burst Sync) and tri-level sync external
synchronization signals.
Ask your dealer to perform this adjustment.
(Use a dual-trace oscilloscope for the adjustment.)

Horizontal phase adjustment

Observe the waveforms of the external sync signal input (tri-level sync
signal) and video signal output on the dual-trace oscilloscope, and use
the wireless remote control or controller to bring the horizontal phase
into alignment.
Bring the horizontal
phase into alignment.
Example: When the tri-level sync phase is adjusted
When performing operations from a wireless
remote control
1. Follow the operation steps in "Basic setup operations"
(→ page 41) to display the Top Menu.
2.
Press the <4> or <5> button to bring the cursor to
[System].
T o p M e nu
C a m e r a
S y s t e m
O u t p u t
P a n / T i l t
P r e s e t
M a i n t e n a nce
3.
Press the <M> button.
The [System] screen appears.
External sync signal
input
(tri‑level sync signal)
Video signal output
40
4. Press the <4> or <5> button to bring the cursor to
[Genlock], and press the <M> button.
S y s t e m
F r e q u e n c y
F o r m a t
G e n l o c k
H o r i z o n t a l P h a s e
H o r i z o n t a l P h a s e S t e p
W i r e l e s s C o n t r o l
F a n
F a n 1
F a n 2
R e t u r n
5. Press the <4> or <5> button to bring the cursor to
[Horizontal Phase], and press the <M> button.
The [Horizontal Phase] value starts blinking.
6.
Press the <4> or <5> button to change the [Horizontal
Phase] value, adjust the value so that the horizontal
phase is brought into alignment, and press the <M>
button.
The extent of the phase adjustment can be selected using [Horizontal
Phase Step].
7.
Press and hold the <MENU> button for about 2 seconds.
The camera menu display is exited.
5 9 . 9 4 H z
2 1 6 0 / 5 9 . 9 4 p
0
1
E n a b l e
H i g h
H i g h