Panasonic AW-UE150WP Operating Instructions Manual page 104

Web screen configurations (continued)
Color Temperature Setting
Color Temperature [2000K to 15000K]
This displays the color temperature when [White Balance Mode] is
[AWB A] or [AWB B].
Varying the output balance of Rch and Bch enables the varying of
the color temperature.
Varying [R Gain] and [B Gain] in [Color TEMP. Setting] also enables
color temperature adjustments.
Its setting takes effect when [AWB A] or [AWB B] has been selected
as the [White Balance Mode] setting.
Factory settings: 3200K
R Gain [–400 to +400]
This enables adjustments to R Gain when [White Balance Mode] is
[AWB A] or [AWB B].
Varying the output of Rch enables the varying of the colors on the
Rch axis.
Its setting takes effect when [AWB A] or [AWB B] has been selected
as the [White Balance Mode] setting.
Factory settings: 0
B Gain [–400 to +400]
This enables adjustments to B Gain when [White Balance Mode] is
[AWB A] or [AWB B].
Varying the output of Bch enables the varying of the colors on the
Bch axis.
Its setting takes effect when [AWB A] or [AWB B] has been selected
as the [White Balance Mode] setting.
Factory settings: 0
G Axis [–400 to +400]
This enables adjustments to G Axis when [White Balance Mode] is
[AWB A] or [AWB B].
Varying the output of Rch and Bch enables the varying of the colors
on the G axis.
Its setting takes effect when [AWB A] or [AWB B] has been selected
as the [White Balance Mode] setting.
Factory settings: 0
AWB Gain Offset [Off, On]
When auto white balance is performed by setting [White Balance
Mode] to [AWB A] or [AWB B], set the values for Rch gain and Bch
gain.
Off Set the value of [R Gain] and [B Gain] to [0].
On Maintain the value set in [R Gain] and [B Gain].
Factory settings: Off
ATW Speed [Slow, Normal, Fast]
Set the control speed of the ATW function.
Slow Tracks at a speed slower than [Normal].
Normal Tracks at normal speed.
Fast Tracks at a speed faster than [Normal].
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings: Normal
ATW Target R [–10 to +10]
Make fine adjustments to the Rch output when converging with the
auto tracking white balance operation.
Factory settings: 0
ATW Target B [–10 to +10]
Make fine adjustments to the Bch output when converging with the
auto tracking white balance operation.
Factory settings: 0
Chroma Level [Off, –99% to 99%]
Set here the color intensity (chroma level) of the images.
Factory settings: 0%
Chroma Phase [–31 to +31]
Make fine adjustments to the hue of the colors in the images.
Factory settings: 0
ABB
When the [Execute] button is clicked, automatic black balance (ABB)
is executed and the black balance is reset.
Master Pedestal [–200 to +200]
This item is used to adjust the black level (adjust the pedestal).
These parts become darker when a negative setting is selected and,
conversely, lighter when a positive setting is selected.
Factory settings: 0
R Pedestal [–100 to +100]
This enables the R pedestal to be adjusted.
Factory settings: 0
G Pedestal [–100 to +100]
This enables the G pedestal to be adjusted.
Factory settings: 0
B Pedestal [–100 to +100]
This enables the B pedestal to be adjusted.
Factory settings: 0
Pedestal Offset [Off, On]
Set the pedestal level of the Rch, Gch, and Bch when the auto black
balance has been adjusted.
Off Set the pedestal level to [0] for [R Pedestal], [G Pedestal],
and [B Pedestal].
On Maintain the values set for each of [R Pedestal],
[G Pedestal], and [B Pedestal].
Factory settings: Off
104