Camera Menu Items; Setting The Camera Menu Items; Top Menu Screen - Panasonic AW-UE150WP Operating Instructions Manual

Camera menu items

Setting the camera menu items

Camera menus are displayed on the monitor when the unit's settings are
to be selected.
The monitor is connected to the MONITOR OUT connector <MONI
OUT>.
The camera menu is only displayed from <MONI OUT> in the factory
default settings, so the OSD menus are not displayed in <12G SDI>,
<3G SDI>, <OPTICAL>, and <HDMI> outputs.
To output the OSD menus via these output connectors, change the
settings for [OSD Mix] in [Output].
The basic camera menu operations involve displaying sub-menus from
the Top Menu items, and selecting settings on the sub-menus.
Some sub-menus have menu items for performing more detailed
settings.
The " " and " " marks in the menu titles indicate the hierarchical level
of the menu currently displayed.
For instance, "
whereas "
that the second hierarchical level is now displayed.
Menu items accompanied by a "
on a scene by scene basis; menu items accompanied by a "
indicate data which is stored together for one camera regardless of the
scenes.
For details on factory default settings, see "Camera menu item table"
(→ page 68).
" indicates the first hierarchical level
" and " " indicate
" mark indicate data which is stored
" mark

Top Menu screen

T o p M e n u
C a m e r a
S y s t e m
O u t p u t
P a n / T i l t
P r e s e t
M a i n t e n a n c e
Camera
Select this to open the camera menu relating to the camera images.
System
Select this to display the System menu used to set up system format
of the camera or adjust the genlock (external synchronization) phase
or establish the camera output image settings.
Output
Select this to display the Output menu used for setting video/audio
output for the camera, OSD output, etc.
Pan/Tilt
Select this to display the Pan/Tilt menu used for various pan/tilt
operations.
Preset
Select this to display the Preset menu used for various preset playback
operations.
Maintenance
Select this to display the Maintenance menu used to check the
camera's firmware version or initialize its settings.
<NOTE>
• The Top Menu does not have a [Return].
42