Panasonic AW-UE150WP Operating Instructions Manual page 102

Web screen configurations (continued)
ELC Limit [1/100, 1/120, 1/250]
Set the maximum shutter level when ELC is operating.
Factory settings: 1/250
Gain
[When [Super Gain] is [Off]: Auto, 0dB to 36dB,
When [Super Gain] is [On]: Auto, 0dB to 42dB]
The image gain is adjusted here.
In locations which are too dark, adjust the gain upward; conversely, in
locations which are too bright, adjust it downward.
When [Auto] is set, the light quantity is adjusted automatically.
The noise increases when the gain is increased.
Factory settings: 0dB
Super Gain [Off, On]
Set the super gain (increased sensitivity) mode.
Off Do not set super gain mode.
On Set super gain mode.
Factory settings: Off
AGC Max Gain [6dB, 12dB, 18dB]
When [Auto] is selected as the [Gain] setting, the maximum gain-up
amount can be set.
Factory settings: 18dB
Frame Mix [Off, 6dB, 12dB, 18dB, 24dB]
Select for frame addition (gain-up using sensor storage) amount.
Its setting takes effect when [Off] has been selected as the [Shutter
Mode] setting (→ page 101).
When frame addition is performed, it will appear as if the images are
missing some frames.
This cannot be configured when the format is 2160/29.97p,
2160/23.98p, 2160/24p, 2160/25p, 1080/29.97p, 1080/23.98p(59.94i),
1080/23.98p, 1080/24p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p or
1080/25PsF.
Factory settings: Off
<NOTE>
• Under discharge tube illumination, such as fluorescent and mercury-
vapor lights, the brightness may change synchronously, colors may
change, and horizontal stripes may flow up and down the image.
ND Filter [Through, 1/4, 1/16, 1/64]
Set the transmittance of the lens' built-in ND (neutral density) filter.
The filter switches when the setting is fixed.
Through Do not set ND filter.
1/4 Set ND filter transmittance to 1/4.
1/16 Set ND filter transmittance to 1/16.
1/64 Set ND filter transmittance to 1/64.
Factory settings: Through
Day/Night
[Day, Night]
Switch between standard shooting and night-vision shooting (shooting
with infrared light).
Day Standard shooting (day mode)
Night Night-vision shooting (night mode)
Factory settings: Day
<NOTE>
• In night mode, video output will be in black and white. In addition,
the iris will be forcibly opened.
• White balance adjustment is not possible in night mode.
• ND filter switching is not possible in night mode.
• [Pedestal] cannot be performed properly in night mode.
z Picture
„
102