Panasonic AW-UE150WP Operating Instructions Manual page 107

Web screen configurations (continued)
HLG Knee [Off, On]
Enable or disable the operation of the HLG knee.
This is only enabled when [Gamma Mode] is set to [HLG].
Factory settings: Off
HLG Knee Point [55% to 100%]
Set the position of the HLG knee point.
This is only enabled when [Gamma Mode] is set to [HLG].
Factory settings: 55%
HLG Knee Slope [0 to 100]
Set the slope of the HLG knee.
This is only enabled when [Gamma Mode] is set to [HLG].
Factory settings: 10
White Clip [Off, On]
Turn the white clip function off/on.
This is only enabled when [Gamma Mode] is set to other than [HLG].
Factory settings: On
White Clip Level [90% to 109%]
Set the white clip level.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This is only enabled when [White Clip] is set to [On].
Factory settings: 109%
<NOTE>
• When [Knee Mode] is set to [Auto] and the value of [White Clip
Level] is changed, the knee value will also change.
DNR [Off, Low, High]
Set the digital noise reduction level for outputting bright, clear images
without noise, even at night and low-light conditions.
When [Low] or [High] is selected, noise can be eliminated.
However, image lag may increase.
Factory settings: Low
z Matrix
„
107