Supermicro SuperServer 1029GP-TR User Manual page 94

Table of Contents

Advertisement

SuperServer 1029GP-TR User's Manual
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event log
is full. The options are Do Nothing and Erase Immediately.
Custom EFI Logging Options
Log EFI Status Codes
Select EFI (Extensible Firmware Interface) Status Codes to log EFI status codes. Select Error
Codes to log EFI error codes. Select Progress Code to log the EFI progress code. Select
both to log both EFI error codes and progress codes. The options are Disabled, Both, Error
code and Progress code.
Note: After making changes on a setting, be sure to reboot the system for the changes
to take effect.
BMC Network Configuration
The following items will be displayed:
IPMI LAN Selection: This item displays the IPMI LAN setting. The default setting is Failover.
IPMI Network Link Status: This item displays the IPMI Network Link status. The default
setting is Shared LAN.
Current Configuration Address Source: This item displays the source of the current IPMI
LAN address. The default setting is CHCP (Dynamic Host Configuration Protocol).
Station IP Address: This item displays the Station IP address for this computer. This should
be in decimal and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask: This item displays the sub-network that this computer belongs to. The value
of each three-digit number separated by dots should not exceed 255.
Station MAC Address: This item displays the Station MAC address for this computer. Mac
addresses are 6 two-digit hexadecimal numbers.
Gateway IP Address: This item displays the Gateway IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
VLAN: This item displays the status of VLAN support.
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are No and Yes. If this option is set to Yes, the following items will display:
94

Advertisement

Table of Contents
loading

Table of Contents