Table of Contents
Advertisement
SuperServer 1029GP-TR User's Manual
MMCFG Base
This feature determines the lowest MMCFG (Memory-Mapped Configuration) base assigned
to PCI devices. The options are 1G, 1.5G, 1.75G. 2G, 2.25G, and 3G.
VGA Priority
Use this item to select the graphics device to be used as the primary video display for system
boot. The options are Auto, Onboard and Offboard.
PCI Devices Option ROM Settings
Onboard NVME1/NVME2 OPROM
Select EFI to allow the user to boot the computer using an EFI (Expansible Firmware Interface)
device installed on the NVME connector specified by the user. Select Legacy to allow the
user to boot the computer using a legacy device installed on the NVME connector specified
by the user. The options are Disabled, Legacy and EFI.
CPU1 Slot 1 PCI-E 3.0 X16
The options are Disabled, Legacy and EFI.
CPU2 Slot 2 PCI-E 3.0 X16
The options are Disabled, Legacy and EFI.
CPU1 Slot 3 PCI-E 3.0 X16
The options are Disabled, Legacy and EFI.
CPU2 Slot 4 PCI-E 3.0 X16
The options are Disabled, Legacy and EFI.
CPU2 Slot 5 PCI-E 3.0 X8
The options are Disabled, Legacy and EFI.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy and EFI.
Network Stack Configuration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Disabled and Enabled.
*If "Network Stack" is set to Enabled, the following items will display:
82
Advertisement
Table of Contents
