Supermicro SuperServer 1029GP-TR User Manual page 48

SuperServer 1029GP-TR User's Manual
SGPIO Header
The S-SGPIO1 (Serial General Purpose Input/Output) header is used to communicate with
the enclosure management chip on the backplane.
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened.
BMC External I C Header
2
A System Management Bus header for IPMI 2.0 is located at JIPMB1. Connect the appropriate
cable here to use the I
Speaker Header
A speaker header is located on JD1. Close pins 1-2 of JD1 to use the onboard speaker.
SGPIO Header
Pin Definitions
Pin# Definition Pin#
1 NC 2
3 Ground 4
5 Load 6
7 Clock 8
NC = No Connection
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
C connection on your system.
2
External I C Header
2
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
Speaker Connector
Pin Definitions
Pin Setting Definition
Pin 1 Power
Pin 2 Buzzer
48
Definition
NC
DATA Out
Ground
NC