Vecow SPC-4500 User Manual page 28

2.3.2.3 PoE (Power over Ethernet)
There are 2 RJ45 connectors in the rear side of SPC-4600. It supports IEEE 802.3at
+
(PoE ) Power over Ethernet (PoE) connection delivering up to 37W/54V per port and
1000BASE-T gigabit data signals over standard Ethernet Cat 5/Cat 6 cable.
Each PoE connection is powered by Intel
independent PCI express interface to connect with multi-core processor for
network and data transmit optimization. Only when PoE port starts to supply
power to power devices, the dedicated LED will be lightened.
The pin-outs of each LAN is listed as follows :
Pin No.
1
2
3
4
5
6
7
8
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network. The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network. The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color
Right
Left
POE LED
POE_LED1/POE_LED2
©Vecow SPC-4500 User Manual
On | Off
IGN
DC-IN 9V-36V
V+ V
10/100 Mbps
E_TX+
E_TX-
E_RX+
------
------
E_RX-
------
------
10Mbps
Green/
Off
Orange
Twinkling
Yellow
Yellow
LED Color
Solid Orange
PoE
1 2
COM 1
1
COM 2
2
®
I210 Gigabit Ethernet controller and
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
100Mbps 1000Mbps
Solid Solid
Green Orange
Twinkling Twinkling
Yellow Yellow
POE Status
POE ON
GETTING TO KNOW YOUR SPC-4500
PoE
PoE+
PoE+
PoE-
------
------
PoE-
------
------
1 8
PoE
1 2
1
2
21