ADJ VIZI WASH Z19 User Instructions page 9

Vizi Wash Z19
CLAMP INSTALLATION
Screw one clamp via a M12 screw and nut into the Omega holder. Insert the quick-lock fasteners of
the Omega holder into the respective holes of the adjustable mounting bracket. Tighten the quick-
lock fasteners fully clockwise. Pull the safety-cable through one of the four rigging points located
on the bottom of the unit and over the trussing system or a safe fixation spot. Insert the end in the
carabine and tighten the safety screw.
SAFETY CABLE
RIGGING POINTS
ADJ Products, LLC - www.adj.com - Vizi Wash Z19 User Manual Page 8
CLAMP
(Not Included)
SCREWS
(Not Included)
SAFETY CABLE
QUICK-LOCK
RIGGING POINTS
FASTENERS
SAFETY CABLE
RIGGING POINTS
SAFETY CABLE
RIGGING POINTS
Installation