ADJ VIZI WASH Z19 User Instructions page 23

Vizi Wash Z19
TARGET MODE - Target mode is a restrictive pan/tilt control limiting the movement to a certain
degree. See page 25 for a diagram of the Target mode movements.
INFORMATION - The submenus listed under INFORMATION are as follows: Fixture Life Time,
Total LED Time, Fixture Temps, Fan Info. (RPM), DMX Values, Error Logs, Max Temp LED ON, High
Temp LED OFF, and Firmware Version.
- FIXTUE LIFE TIME
• Power On Time -The TOTAL power ON running time of the unit is displayed. This time CANNOT
be reset.
• P-On Time-R - The CURRENT power ON running time of the unit is displayed. This running time
may not be the same as the total power ON running time displayed under "Power On Time". This
time CAN be reset. NOTE: The displayed time represents the current power ON time since the
last reset.
• P-On Time Reset - Reset the CURRENT power ON running time that is displayed under "P-On Time-R".
- TOTAL LED TIME
• LED On Time - The TOTAL LED ON time is displayed. This total LED ON time CANNOT be reset.
NOTE: The displayed time represents the TOTAL LED ON time.
• LED On Time-R - The CURRENT LED ON running time is displayed. This running time may not
be the same as the total LED ON time displayed under "LED On Time". This total LED ON time
CAN be reset. NOTE: The displayed time represents the current LED ON time since the last
reset.
• LED On Time Reset - With this function you can reset the CURRENT LED ON time that is displayed
under "LED On Time-R".
- FIXTURE TEMPS (LED):
• Current - The current LED temperature will be displayed.
• Max Resettable - The current highest temperature the LED has reached will be displayed. This
LED temperature may not be the same as the temperature displayed under "CURRENT" or "MAX NOT
RESETTABLE". This LED temperature CAN be reset.
NOTE: The displayed temperature represents the highest temperature the LED has reached
since the last reset.
• Max Not Resettable - The current highest temperature the LED has reached will be displayed.
This LED temperature CANNOT be reset, and could continue rise.
Reset LED Temp - With this function you can reset the "MAX RESETTABLE" LED temperature.
NOTE: When the temperature is reset, the "Max Resettable" temperature will revert to the CURRENT
LED temperature.
- FAN INFO. (RPM)
• Base Fan - Current running speed of the base fan is displayed.
• LED Fan - Current running speed of the LED fan is displayed.
- DMX VALUES - In this submenu are able to check the DMX values of any DMX channel that is currently
ADJ Products, LLC - www.adj.com - Vizi Wash Z19 User Manual Page 22
System Menu