ADJ VIZI WASH Z19 User Instructions page 22

Vizi Wash Z19
DMX SETTINGS - The submenus listed under DMX SETTINGS are as follows: DMX Address, DMX
Channel Mode, and No DMX Status.
- DMX ADDRESS - In this submenu you can use the UP or DOWN buttons to adjust and find your
desired DMX address.
- DMX CHANNEL MODE - In this submenu you can use the UP or DOWN buttons to find your
desired DMX channel mode.
- NO DMX STATUS - This submenu setting is used as a precaution mode in case the DMX signal is
lost or interrupted. The operating mode chosen in this submenu is the running mode the fixture
will go into when the DMX signal or power is lost. Listed below are the 4 modes.
• Hold Last -This setting will have the fixture stay in the last DMX setup.
• Blackout - This setting will have the fixture automatically go into stand by mode (blackout).
• Internal Programs - This setting will have the fixture run an internal program.
• Manual -This setting will have the fixture automatically go to the setup made under the "Manual
Control" menu. See MANUAL Control below.
PERSONALITY - The submenus listed under PERSONALITY are as follows: Status Settings, Fan
Settings, Dimmer Modes, Gamma Settings, Reset Motors, Display, and Service.
- STATUS SETTINGS - In this submenu you are able to access and adjust/change the Pan Invert,
Tilt Invert, P./T. Feedback, P./T. Speed, and Hibernation.
- FAN SETTINGS - In this submenu you are able to access and adjust/change the head fan setting
and base fan setting.
- DIM MODE SETTINGS - In this submenu you are able to access and adjust/change the dimming
modes and dimming speeds. The adjusted dimming speeds will over ride and change any dimming
mode that is currently selected.
- GAMMA SETTINGS - In this submenuyou are able to select your desired gamma setting.
- RESET MOTORS - In this submenu you are able to reset the pan/tilt motors, effect motors, and
zoom motor.
- DISPLAY - In this submenu you are able to access and adjust/change the backlight intensity, display
inversion, screen saver display time, and display lock function.
- SERVICE - In this submenu you are able to access the effect calibration, USB port power on/off,
software update, and restore the factory settings.
MANUAL CONTROL - This menu is for manual testing and manual control. All adjustments and
settngs made under this menu will be reflected under the "Manual" setting in the "NO DMX
STATUS" submenu.
ADJ Products, LLC - www.adj.com - Vizi Wash Z19 User Manual Page 21
System Menu