MZ-N707
4. When all the keys on the set and on the remote commander are
considered as OK, the following displays are shown for 4 sec-
onds.
Example1: When the keys on the set are considered as OK:
Set LCD display
8 88
: AD value of the remote commander key
(hexadecimal 00 to FF)
Example2: When the keys on the remote commander are con-
sidered as OK:
Set LCD display
8 88
: AD value of the remote commander key
(hexadecimal 00 to FF)
5. When all keys were checked or if the upper panel is opened,
the key check mode quits and the test mode (display check
mode) comes back.
18
Need help?
Do you have a question about the MZ-N707 OpenMG Jukebox NOTES on installing & operating and is the answer not in the manual?
Questions and answers