Refi T And Check Window - Valor Madrona MF28JN Installation & Owner's Manual

Refi t and Check Window
DANGER
!
The window unit must be correctly installed,
fastened and sealed after servicing or serious
bodily injury and/or damage to the appliance
may result.
To ensure a safe operation:
• Double-check that the window frame is
correctly installed;
• Verify that the spring-loaded bolts are hooked
properly to the window tabs then;
• Pull out the top, then bottom of the window
and release it to insure the springs return it;
• Ensure the window is sealed before operation.
WARNING
!
Failure to install the window correctly can
leak carbon monoxide, aff ect the performance
of the fi replace, damage components, cause
overheating resulting in dangerous conditions.
Damage caused by incorrect window installa-
tion is not covered by the Valor warranty.
To refi t the window:
1. Place it on the fi rebox frame and hold it in place
while pushing and turning its fastening studs 90
degrees.
x 4
2. Pull out the top and bottom of the window and
release it to insure the springs return it.
Installation
3. Apply fi rm hand pressure around the window frame
to ensure the window is sealed tight against the
fi rebox.
4. If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
Hot Glass Warning Plate
QUALIFIED
INSTALLER
39