Install Splitwood Kit Mf28Swk - Valor Madrona MF28JN Installation & Owner's Manual

Install Splitwood Kit MF28SWK

Material required
• Splitwood Kit containing:
•
1 ceramic platform
•
5 logs
•
1 bag of embers
• Gloves, if desired
Installation
Unpack the kit carefully to avoid damaging the fragile
pieces. Install the kit as shown below. Please note
that the position of the logs is critical to insure the
good performance of the appliance.
Platform
Insert the platform sideways into the fi rebox and place
it on top of the burner.
Installation
Logs
1. Identify the base log and place it in the cavity of the
ceramic platform. The front of the log should rest
against the lip of the sheet metal support behind the
burner.
2. Place the center log inserting its two pins in the
holes at the front of the platform.
QUALIFIED
INSTALLER
37