Cleaning Your Stove - Valor Madrona MF28JN Installation & Owner's Manual

Direct vent gas free standing engine
Hide thumbs Also See for Madrona MF28JN:
Table of Contents

Advertisement

Cleaning Your Stove

WARNING
!
DO NOT TOUCH THE GLASS WHILE IT IS HOT!
Let the stove cool fi rst before cleaning it.
Cleaning the Window
Important - Glass cleaning - Mineral deposits
One of the by-products of the combustion process in
a gas appliance is a mineral which can show up as a
white fi lm on the ceramic glass of the viewing door.
The composition of the deposit varies widely with
location and time. It is believed to be associated with
the varying sulfur content of the gas. You may have the
problem intermittently.
We have consulted with ceramic glass manufacturers
and they cannot off er a defi nitive solution to this
problem. Dealers have tried various cleaning products
with varying results. The following are recommendations
only and are not meant to guarantee results.
NOTE: This is a problem beyond Miles Industries'
control and is not covered under warranty.
• Clean the glass regularly as soon as you notice
the buildup (white fi lm). If the fi lm is left for a longer
period of time, it will bake on. It is then much harder,
if not impossible, to remove.
• NEVER use an abrasive cleaner or ammonia-based
cleaner on the ceramic glass. Any abrasion of the
surface has the immediate eff ect of compromising
the strength of the glass. An emulsion type cleaner
is recommended.
• Use a soft damp cloth to apply the cleaner. Dry the
glass with a soft, dry, preferably cotton cloth. Most
paper towels and synthetic materials are abrasive to
ceramic glass and should be avoided.
• Our dealers have had good results from the
products listed below. We cannot, however,
guarantee the results of these products.
B
, P
P
C
C
by E
T
W
Do not clean the glass while it is hot!
Always securely replace the window and the barrier
screen before lighting.
If broken, the glass pane may only be replaced
as a complete window unit as supplied by the
manufacturer.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer's barrier for this
appliance.
Servicing & Maintenance
by K
, C
T
, W
O
by R
Cleaning Your Stove
Barrier screens
The barrier screens can be brushed clean.
Stove body
The matte cast iron stove body can be brushed clean.
The enameled cast iron and the painted steel stove body
can be cleaned with mild soap and water then dried with
a lint-free soft cloth.
Touching Up Paint
If you need to touch up the paint on your matte cast
units MFCS01 or MFCS05, use the Stove Bright by
Forrest 1990 Satin Black spray paint. Please note that
it may be necessary to spray the entire cast piece.
Logs and burner
Dust can be brushed from the ceramic logs and fi rebox
walls after removing the front unit and opening the win-
dow. Dust can also be removed from the burner using
a soft brush after removing the ceramic logs. When
cleaning, make sure that no particles are brushed into
the slots of the burner.
To remove the window for cleaning:
1. Traditional arched front stoves MFCS01 and
MFCS02: Remove the barrier screen by pulling it on
each side and then unhooking the top clip.
Traditional square front stoves MFCS01,
MFCS02 and Madrona Modern stove MFCS05:
Unhook the cast front.
2. Traditional arched front stoves MFCS01 and
MFCS02: Unhook the cast front.
3. Rotate the four fastening studs of the window 90
degrees to release them and gently pull the window
unit outwards. Set aside in a safe place to avoid
damage.
,
x 4
OWNER'S
INFORMATION
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Madrona mf28jp

Table of Contents