QUALIFIED
INSTALLER
Install Battery Holder
The batteries that power the receiver need to be
installed and placed prior to synchronization and use.
1. Take the receiver out from under the fi rebox.
2. The battery holder and cable are supplied with the
appliance. Insert 4 x 1.5 V high quality alkaline
batteries in the battery holder and 1 9V battery in
the remote handset.
3. Connect the cable to the receiver.
4. Connect the other end of the cable to the battery
holder.
40
Installation
5. Place the receiver and battery holder as shown
under the fi rebox, to the left of the control valve
(placement may vary with installed options).
Battery holder
6. Use a heat resistant tie to gather any extra cable
between the receiver and the holder.
DO NOT let the cable touch the burner plate above, it
will melt during operation.
CAUTION