Incoming Procedure Of Isdn - Sony PCS-1 System Integration Manual

1-6-2. Incoming Procedure of ISDN

n
It is required that the line number used in this unit is entered in the area code and local number of the ISDN setting menu
before receiving a signal from the other end.
Item Operation
1. Incoming from the remote side
2. <For automatic response>
<For manual response>
3. Remote disconnection
PCS-1/PCS-1P
Screen
Picture on
the local site
Incoming Call (ISDN)
LAN
0987654321
Picture on
XX.XX.XX.XX
the remote
Cancel
site
Meeting starts!
Picture on
the local site
Picture on
the remote
site
Meeting starts!
Connect
Receive a signal. Respond to?
ISDN
Phone Book
XX.XX.XX.XX
Dial
O K Cancel
Menu
Angle Adj.
Show Help
IP:0.0.0.0 ISDN:012345678912
Video:Main Audio:MIC(INT)+AUX
Picture on
the local site
Picture on
the remote
site
Meeting starts!
Connect
Phone Book
Dial
Menu
Angle Adj.
Show Help
IP:0.0.0.0 ISDN:012345678912
Video:Main Audio:MIC(INT)+AUX
Remarks (Confirmation item)
An incoming sound occurs.
"Incoming" is displayed on the
screen.
During connection, "Start meeting" is
displayed, and the remote voice and
image are heard and displayed from
the monitor television.
A call sound occurs and the guide
screen for incoming appears on the
screen.
Select "OK" using a or button
of a remote controller and press the
decide button.
During connection, "Start meeting" is
displayed, and the remote voice and
image are heard and displayed from
the monitor television.
The message of conference
termination is displayed on the screen
and the current display returns to a
launcher menu.
1-23