Sony PCS-1 System Integration Manual page 19

5. Enter the telephone number of the ISDN used by the
system.
When you use one ISDN line, enter the same number
both in the A1 and A2 text boxes (except for the USA
and Canada).
Area Code
A1
A2
B1
B2
C1
C2
Previous
Area Code:
Enter the area code. Do not enter the first "0" number.
Local Number:
Enter the telephone number.
When you select Auto SPID (only for customers in
the USA and Canada)
You can automatically set up the Area Code and Local
Number on this page, and SPID items in the SPID
menu.
n
When 2-6 ISDN lines are used, enter the telephone
numbers in the B1 to F2 text boxes in addition to the
A1 and A2 boxes. To open the menu with D1 to F2
text boxes, select "Next", then press the PUSH
ENTER button.
6. Use the , , or button to select "Next", then
press the PUSH ENTER button.
PCS-1/PCS-1P
Local Number
Next Cancel
7. Enter the sub-addresses.
Only numerals are available for a sub-address.
When you use one ISDN line, enter the same number
both in the A1 and A2 text boxes (except for the USA
and Canada).
Sub Address
A1
A2
B1
B2
C1
C2
Previous
n
When 2-6 ISDN lines are used, enter the sub-addresses
in the B1 to F2 text boxes in addition to the A1 and A2
boxes. To open the menu with these text boxes, select
"Next", then press the PUSH ENTER button.
8. Use the , , or button to select "Next", then
press the PUSH ENTER button.
For customers in other countries than the USA and
Canada
The LAN Setup Wizard appears.
For customers in the USA and Canada
The ISDN Setup Wizard (SPID menu) appears.
Set the SPID items, then select "Next" and press the
PUSH ENTER button.
The LAN Setup Wizard appears.
For details on the SPID settings, see "SPID Setting for
Customers in the USA and Canada" on page 46.
n
When you do not use the LAN, select "Next" to
display the message window for confirmation, then
proceed to step 11.
Next Cancel
1-15