10 Siting the indoor module
10.1 Minimum clearances for the indoor module
Fig.: Front view of indoor module
10.2 Securing the appliance with the suspension bracket
When installing the appliance, ensure that the fixings have sufficient load bearing capacity. In addition,
take into account the condition of the wall, otherwise refrigerant and water could escape, resulting in a
risk of flooding.
1. Mark the Ø12 holes to be drilled for the suspension bracket, taking into account the minimum clearances.
2. Insert the rawl plugs and fit the suspension bracket using the screws supplied.
3. Hang the indoor module into the suspension bracket using the mounting stay.
Ceiling
344
Fig.: Suspension bracket
3064298_201805
Siting the indoor module
≥ 40
Fig.: Plan view of indoor module
Fig.: Rear view of indoor module
≥ 40
Mounting stay
21