Page 3
PNP lnstallation Instructions 2 As the photo show, use glue to attach the Install Horizontal Stabilizer horizontal stabilizer on the fuselage. 1 Insert the carbon tube to the fuselage Carbon tube Ø4x160mm Step Step Install Main Wing Screw PA3x8 2pcs As the photo show, install the main wing on the indicated position, then use screw to fix.
Page 4
PNP lnstallation Instructions Pushrod Instructions Aileron pushrod size Aileron pushrod mounting hole Pushrod diameter Ø 1. mm 55mm (2-1/8") Elevator pushrod mounting hole Elevator pushrod size Pushrod diameter Ø 0 1. mm 338mm (13-1/4") Battery Size Before connecting the battery and receiver, please We recommend the following LiPo battery: switch on the transmitter power and make sure 3 11 1 1000...
Page 5
PNP lnstallation Instructions Control Direction Test Stick Down Stick Up Dual Rates According to our testing experience, use the following parameters to set Aileron/Elevator Rate. Program your preferred Exponential % in your radio transmitter. We recommend using High Rate for the first flight, and switching to Low Rate if you desire a lower sensitivity.
Need help?
Do you have a question about the Fw190 D-9 Dora and is the answer not in the manual?
Questions and answers