Display Lighting (Dimmer) - Silvercrest SRWK 800 A1 Operating Instructions Manual

Display lighting (DIMMER)

You can adjust the brightness of the LED read­out on the display
two steps or switch it off completely .
♦ In radio mode, press the SNOOZE/DIMMER button
increase or decrease the brightness of the display
switch it off completely .
NOTE
► In standby mode, the display
between 11 pm and 4:59 am (night mode) . During this time,
permanent lighting in standby mode is not possible and cannot
be switched on again permanently for a short time by pressing
a key . Each time a button is pressed, the display
the brightest level for 5 seconds .
► The brightness remains at the currently selected level except for
between the hours of 11 pm and 4:59 am (night mode) .
SRWK 800 A1
is automatically switched off
1
to
6
in stages or
1
lights up at
1
GB │ MT │ 91
in
1
■