Other Functions; Display Lighting; Sleep Function - Silvercrest SCUR 3 A1 Operating Instructions And Safety Instructions

Other functions

Display lighting

♦ You can set the brightness of the LED display
SNOOZE/DIMMER button
the display
–
The brightness remains at the currently selected level except for between
the hours of 11 pm and 5 am (night mode).
–
When the device is switched on, the brightest mode is always used.
–
After switching off the device, the display is automatically set to the
lowest brightness after 10 seconds. The display
brightest level for 10 seconds every time a button is pressed.
NOTE
► In standby mode the display
from 11 pm to 5 am (night mode). Permanent illumination is not possible in
standby mode during this time.

Sleep function

You can use this function to automatically switch the device off after 15–
90 minutes.
During radio or CD playback, press the SLEEP/NAP button
♦
"ZZZ" and "15" (minutes) appear on the display
♦ Press the SLEEP/NAP button
45, 60, 90, OFF).
The sleep function is activated after around 5 seconds if no other button is
pressed. As long as the sleep function is activated, "ZZZ" appears on the
display
♦ Press the SLEEP/NAP button
show the remaining time until the device is switched off.
♦ To deactivate the function, press the SLEEP/NAP button
appears on the display
NOTE
► If, during CD playback, the CD playback time is less than the set SLEEP
time, the playback is stopped at the end of the CD.
GB │ IE
■ 48
│
in stages.
is automatically dimmed during the period
.
or switch off the device.
in three stages. Press the
to increase or decrease the brightness of
.
repeatedly to set the SLEEP time (15, 30,
once
while the function is activated to
is restored to the
briefly.
until "OFF"
SCUR 3 A1