Alarm Times - Silvercrest SRWK 800 A1 Operating Instructions Manual

Alarm times

The device has two alarm functions, alarm 1 (AL 1) und alarm 2 (AL 2) .
For both functions, you can set playback of the last radio station
listened to or an alarm signal on certain days of the week at a
certain time .
Setting the alarm
NOTE
► Before setting the alarm time, the time and day of the week must
be set correctly .
► To switch the set alarm times on and off, the device must be
in standby mode . The settings of alarm times, alarm signal or
radio station and weekdays can also be made with the device
switched on .
♦ Use the
mode (if required) .
♦ Set the function switch
(Alarm 2) .
Turn the VOLUME/HOUR ‒ /+ dial
♦
wise to set the hours .
Turn the TUNING/MIN. ‒ /+ dial
♦
to set the minutes .
♦ Press the
seconds to switch between the alarm modes 'alarm signal' and
'radio playback':
–
alarm signal
–
radio playback
♦ If you have selected radio playback as the alarm type, briefly
press the
from the alarm time display to the alarm volume setting .
Turn the VOLUME/HOUR ‒ /+ dial
♦
wise to set the alarm volume .
SRWK 800 A1
/AMS button
4
r
or
│‒ or the
5
│‒ or the
5
to switch the device into standby
to AL1 SET (Alarm 1) or AL2 SET
and 0:00 flash on the display
2
clockwise or anticlockwise
3
│+/MEM
│+/MEM
2
clockwise or anticlock­
button for about 2
7
button to switch
7
clockwise or anticlock­
GB │ MT
.
1
│ 87 ■