Advertisement
E09
Positioning signal error
E11
E14
Encoder signal error.
Power module abnormal over current
E15
protection
The sewing table safety switch is not in
E17
the correct position
5 Port Outline Diagram:
5.1 Port Description
If there are still errors, please replace the control box and call
for customer service.
Turn off the machine, please check if the encoder in bad
connection or is too loose. To get it right and turn on. If there
are still errors, please replace the control box and call
for customer service.
Turn off the system power supply, please check motor encoder
connector if loose or fall off, renew to normal then restart
system. If still not work, please replace the motor and notify the
manufacture.
Turn off the system power supply, and then restart the
machine. If still not work, please replace the control box and
notify the manufacture.
Turn off the system power supply, please check machine head
is open or not, the machine head switch is damage or not.
- 4 -
Advertisement
