Requirements For Mounting An Ex-Series Switch On The Desktop Or Wall; Cabinet Requirements And Specifications For An Ex-Series Switch; Clearance Requirements; Clearance Requirements For Airflow And Hardware Maintenance - Juniper EX Series Complete Hardware Manual

Complete Hardware Guide for EX 3200 and EX 4200 Switches

Requirements for Mounting an EX-series Switch on the Desktop or Wall

You can install an EX-series switch on a desktop or wall. When choosing a location,
allow at least 6 in. (15.2 cm) of clearance between the front and back of the chassis
and adjacent equipment or walls.
If you are mounting an EX-series switch on a wall, use the EX-series switch wall
mount kit from Juniper Networks. The wall mount kit is not part of the standard
package and needs to be ordered separately.
Related Topics

Cabinet Requirements and Specifications for an EX-series Switch

You can mount an EX-series switch on a 19-in. cabinet as defined in Cabinets, Racks,
Panels, and Associated Equipment (document number EIA-310–D) published by the
Electronics Industry Association (
Related Topics

Clearance Requirements

Clearance Requirements for Airflow and Hardware Maintenance

When planning the site for installing an EX-series switch, you must allow sufficient
clearance around the installed switch (see Figure 24 on page 52).

Figure 24: Clearance Requirements for Airflow and Hardware Maintenance

52
Requirements for Mounting an EX-series Switch on the Desktop or Wall
Clearance Requirements for Airflow and Hardware Maintenance on page 52
Mounting an EX-series Switch on a Desk or Other Level Surface on page 66
Clearance Requirements for Airflow and Hardware Maintenance on page 52
Rack Requirements and Specifications for an EX-series Switch on page 50
Mounting an EX-series Switch on a Rack or Cabinet on page 67
Clearance Requirements for Airflow and Hardware Maintenance on page 52
).
http://www.eia.org