Juniper EX Series Complete Hardware Manual page 30

Complete Hardware Guide for EX 3200 and EX 4200 Switches
Table 3: Physical Specifications of the EX-series Switch Chassis (continued)
Description
Chassis depth
Weight
You can mount an EX-series switch on a 19-in. or 23-in. equipment rack or cabinet
by using mounting brackets. You can mount an EX-series switch on a desk or other
level surface by using rubber feet. The switch is shipped with mounting brackets and
screws to be used to secure the chassis to rack or cabinet rails. It is also shipped with
4 rubber feet to be used to stabilize the chassis on a desk or other level surface.
Related Topics
Field-Replaceable Units in EX-series Switches
Field-replaceable units (FRUs) are components that you can replace at your site. The
field-replaceable units (FRUs) in EX-series switches are:
NOTE: Uplink modules are not part of the standard package and must be ordered
separately.
8
Field-Replaceable Units in EX-series Switches
Value
17 inches (43.18 cm), extended by 2.25 inches by power supply in models that have 600 W
and 930 W power supply
EX 3200 switch with 1 power supply: 15–17 lbs (6.8–7.7 kg)
EX 4200 switch with 1 power supply: 16–18 lbs (7.2–8.2 kg)
320 W power supply: 2.5 lbs (1.1 kg)
600 W and 960 W power supplies: 3.1 lbs (1.4 kg)
EX 3200 Switch—Front-Panel Description on page 9
EX 3200 Switch—Rear-Panel Description on page 10
EX 4200 Switch—Front-Panel Description on page 11
EX 4200 Switch—Rear-Panel Description on page 12
Mounting an EX-series Switch on page 65
Rack Requirements and Specifications for an EX-series Switch on page 50
Cabinet Requirements and Specifications for an EX-series Switch on page 52
Installing and Connecting an EX-series Switch on page 61
Installing and Removing EX-series Switch Hardware Components on page 100
Power supply
Fan tray
Uplink module
SFP transceiver
XFP transceiver