Table 21: Management Port Connector Pinout Information - Juniper EX Series Complete Hardware Manual

EX-series Switch Management Port Connector Pinout Information
The management port on the rear panel of an EX-series switch chassis has an RJ-45
connector. Table 21 on page 35 provides the pinout information of the RJ-45
connector. An RJ-45 cable is supplied with the switch.

Table 21: Management Port Connector Pinout Information

Pin
1
2
3
4
5
6
7
8
Related Topics
Uplink Modules Connector Pinout Information
EX-series switches have a field-replaceable unit (FRU) uplink module on the front
panel. Table 22 on page 35 provides the uplink modules connector pinout information.
NOTE: You can use the ports in the uplink modules as virtual chassis ports.
Table 22: Uplink Modules Connector Pinout Information
Pin Number
A1
A2
A3
Signal
TX+
TX-
RX+
Termination network
Termination network
RX-
Termination network
Termination network
EX 3200 Switch—Rear-Panel Description on page 10
EX 4200 Switch—Rear-Panel Description on page 12
Virtual Chassis Ports Connector Pinout Information on page 42
Uplink Modules Connector Pinout Information on page 35
EX-series Switch—Console Port Connector Pinout Information on page 34
Pin Name
GND
GND
GND
EX-series Switch Management Port Connector Pinout Information
Chapter 1: Switch Overview
Description
Transmit data
Transmit data
Receive data
Receive data
35