Page 1
INSTALLATION AND CARE GUIDE WOODBRIDGE COMPACT ONE PIECE TOILET: T-0031/B0500 DESIGN FOR SMALL BATHROOM Compliance with the following codes & standard: ( UPC ) ® • 2015 Uniform Plumbing Code ( IPC ) ® • 2018 International Plumbing Code ®...
COMPACT ONE PIECE TOILET WOODBRIDGE READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT INSTRUCTIONS THAT, IF IGNORED COULD RESULT IN DEATH OR SERIOUS INJURY CAUSED BY INCORRECT HANDLING OR INSTALLATION OF THE PRODUCT. THESE INSTRUCTIONS MUST BE OBSERVED FOR SAFE INSTALLATION.
Page 3
COMPACT ONE PIECE TOILET WOODBRIDGE DESIGN FOR SMALL BATHROOM 24 3/8" 12 5/8" 5 1/2" 1 1/8" 16 1/2" Rough-in 12" Standard IMPORTANT INFORMATION • Measurements are +3/8" and subject to change without notice • Please note that installer(s) must be certify or warranty will be voided.
COMPACT ONE PIECE TOILET WOODBRIDGE DESIGN FOR SMALL BATHROOM Side View Back View Threaded Shunk (Water Supply Fill Valve) Floor Rough-in 12" Standard Side View Tank Top View (Inside) Full Half Flush Flush (1.6GPF) (1GPF) Adjust the water level in the...
COMPACT ONE PIECE TOILET WOODBRIDGE INSTALLATION INSTRUCTIONS IMPORTANT! Shut off main water supply prior to installation! REMOVE OLD TOILET 1. Shut off water supply line. If you do not have shut-off valve near the toilet shut off main water supply line.
Page 6
COMPACT ONE PIECE TOILET WOODBRIDGE CAUTION! 2 PEOPLE ARE REQUIRED TO LIFT AND DURING ENTIRE INSTALLATION OF THIS PRODUCT INSTALL NEW TOILET Step 1. Lift and carefully put the toilet over the closet flange so the closet bolts can go through the mounting holes in the toilet's base.
Page 7
COMPACT ONE PIECE TOILET WOODBRIDGE TOILET SEAT ADJUSTMENT Hinge set Seat and cover Insert the hinges into the toilet Tighten the screws of the hinges Untighten the screws a bit by turn- ing them 90° right Clip on the toilet seat and cover...
COMPACT ONE PIECE TOILET WOODBRIDGE ADJUSTMENT & MAINTENANCE (DUAL FLUSH VALVE) Important Note: Flush GPF amount is factory set. No additional adjustment is required. This page is for reference only. All adjustments are already made by manufacturer. 1. BASE INSTALLATION...
Page 9
COMPACT ONE PIECE TOILET WOODBRIDGE ADJUSTMENT & MAINTENACE (FILL VALVE) Important Note: Flush GPF amount is factory set. No additional adjustment is required. This page is for reference only. All adjustments are already made by manufacturer. Instructions: 95mm When valve installed, the critical level mark on fill valve (identified by C.L.
Note: fill and flush valves are maintenance free. No maintenance is required. Retain these installation instructions for future reference! Thank you for using WoodBridge products! Customer Service Phone: 562-774-2284. (Monday - Friday 9 AM - 5 PM Pacific Time) Or Email: help.woodbridge@gmail.com...
WOODBRIDGE NOTES NOTES INSTALLER INFORMATION INSTALLER INFORMATION DATE OF INSTALL: DATE OF INSTALL: INSTALLER’S NAME: INSTALLER’S NAME: PLUMBER: PLUMBER: CONTRACTOR: CONTRACTOR: LICENSE #: LICENSE #: www.woodbridgebath.com...
Page 12
Compact one Piece toilet WOODBRIDGE Design for small Bathroom 24 3/8" 12 5/8" 5 1/2" 1 1/8" 16 1/2" Rough-in 12" Standard IMPORTANT INFORMATION ● Measurements are +3/8" and subject to change without notice ● Please note that installer(s) must be certify or warranty will be voided.
Compact one Piece toilet WOODBRIDGE Design for small Bathroom Side View Back View Threaded Shunk (Water Supply Fill Valve) Floor Rough-in 12" Standard Side View Tank Top View (Inside) Full Half Flush Flush (1.6GPF) (1GPF) Adjust the water level in the...
Need help?
Do you have a question about the T-0031/B0500 and is the answer not in the manual?
Questions and answers