biodex NxSTEP 950-485 Instructions For Use And Assembly page 15

Installing and Removing the Handrails
Figure 3.5. The handrail release button.
The handrails can be used to assist the patient, or removed to provide more of a challenge.
To install or remove the handrails, push in on the appropriate handrail release button.
The Therapist Stool
NOTE: Setting up the Therapist Stool, Hand-Held Controller, and Battery Pack, are all fully
explained in the Preparing the NxStep for First Use segment of the NxStep eLearning Course.
One Therapist Stool comes standard on each NxStep. An additional stool can be purchased
separately (catalog product code: 950-486). While seated on the stool, a clinician can easily
observe or assist patients with foot placement and weight shifting.
To remove the therapist stool, simply lift it up. To install the therapist stool, fit the stool
•
support into either of the two positioning holes along each support bar. The seat can face
either in or out from the subject, and the height of the seat can be adjusted by moving the
bolt into any of the six holes in the stool post.
Figure 3.6. The Therapist Stool.
15