4, Printing Instruction; Main Menu Introduction; Control Panel; Function Introduction - JGaurora JGMAKER Magic User Manual

4.1 Main Menu Introduction

4.1.1 Control Panel

①Nozzle Setted Temp.
②Nozzle Actual Temp.
③X/Y/Z Axis Coordinate
④Speed Adjustment Ratio
⑤SD Card Status

4.1.2 Function Introduction

（1）Main Menu：
（2）Preheat：Preheat PLA\Preheat ABS
【Preheat PLA\ABS】 :Both preheat nozzle and hotbed，the corresponding temperature has been set in 【Control】 ；
【Preheat PLA\ABS END】：Preheat nozzle only；
【Preheat PLA\ABS Bed】：Preheat hotbed only；

4, Printing Instruction

【Prepare】：Prepare works before printing，Include Move axis、Auto home、
Preheat、Cooling、Disable steppers、change filament etc.；
【Control】 ： Advanced settings， Include Temperature、 Motion、 Filament etc.；
【Print from SD】：Print model menu（ Shown as Print from SD Card after
insert SD Card or shown as No SD Card after SD Card removed.）；
18
With User to Create Better Product
⑥Hotbed Setted Temp.
⑦Hotbed Actual Temp.
⑧Adjustment knob
（Rotate Select, Press Ok）
⑨Fan speed
⑩Print Progress