Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for JGaurora A3S
Summary of Contents for JGaurora A3S
- Page 1 JGAURORA 3D PRINTER MODEL: A3S USER GUIDE...
-
Page 2: Table Of Contents
1.2 Safety advice................................2 1.3 Filament requirements.............................2 1.4 Environmental requirements........................... 2 2. About A3S....................................3 2.1 Basic reference................................. 3 2.2 Overview of A3S............................... 3 2.3 Nozzle exploded view ............................... 4 2.4 Tool box lists................................5 3. About JGcreat software................................6 3.1 Software installation..............................6 3.2 JGcreat introduction..............................7... -
Page 3: Preface
JGAURORA A3S. Even if you are familiar with earlier JGAURORA machines or 3D printing technology, we still recommend that you read through this guide, as there is lots of important information about the A3S for you to get a better 3D printing experience. -
Page 4: About A3S
Support material: PLA /ABS/WOOD+PLA/PETG LCD display: 4.3’ Touch Screen Filament diameter: 1.75mm Connectivity: USB cable/ USB stick Language :English/German/French/Spanish/Japanese/etc. Support Formats：STL、OBJ、G-Code Environmental requirements: 5~40℃, humidity: 20%~50% OS: Windows, Linux, Mac AC Input: AC110~220V Software: Cura/JGcreat/Simplify3d(Win 7 64 bit) 2.2 Views of A3S... -
Page 5: Nozzle Exploded View
----3D Printer User Guide 2.3 Nozzle exploded view Item No. Parts Name Item No. Parts Name Extruder cover Cooling duct Quick coupling Nozzle Square fan Heating block ⑪ Turbofan Polished rod seat II ⑫ Limit switch Polished rod seat I ⑬... -
Page 6: Tool Box Lists
----3D Printer User Guide 2.4 Tool box lists... -
Page 7: About Jgcreat Software
----3D Printer User Guide 3. About JGcreat software 3.1 Software installation Copy the files in USB stick to your PC, double click the software installation icon, and enter the software installation interface, the installed process is as the picture shown: Double click... -
Page 8: Jgcreat Introduction
----3D Printer User Guide After clicking the “Finish” icon, the installation of software is completed. 3.2 JGcreat introduction 1) Open the software(JGcreat) Double click to Open “JGcreat”... - Page 9 ----3D Printer User Guide 2) Choose the language you prefer (English as an example):...
- Page 10 ----3D Printer User Guide 3) Add Printer Choose A-3S 4) Load 3d file and slice it Load an stl or obj 3d file. Select the appropriate print quality. The lower right corner of the software shows "Slicing", that is to generate Gcode. Choose the print quality you prefer...
- Page 11 After slicing is completed, the lower right corner of the software shows "Save to file". 5) Copy the G-code to the USB stick, insert it to USB port on the A3S printer, and then select the gcode file to print through the touch screen.
-
Page 12: Basic Printing
----3D Printer User Guide 4. Print operation 4.1 Control menu introduction CLOSE HEAT E1 HEAT/BED HEAT MORE CHANGE PAUSE MORE BACK RIGHT （ X+） LEFT（X-） Backward （ Y+） Forward（Y-） STOP MOVE UP（Z+） DOWN（Z-） CLOSE BACK E1 HEAT/BED HEAT HEAT Choose Operate PRINT Printing... -
Page 13: Main Menu Introduction
----3D Printer User Guide 4.2 Introduction of main screen Preheat extruder and platform Move extruder position XYZ home or X/Y/Z home Select model file to print More options and functions Leveling platform Filament IN/OUT manually 4.3 Platform leveling Click HOME in the main screen to “HOME”menu ,Click [HOME] , show as below : Press “HOME”... -
Page 14: Filament Loading
----3D Printer User Guide After back to home, move the extruder part through the moving shafts according to the directions as shown in the diagram. Using a piece of copy paper as a thickness guide, place it on the print bed. Move the nozzle over the paper and try to remove the paper. - Page 15 ----3D Printer User Guide Click [ADD] to increase nozzle temp. to 200’C During preheating, pls install filament holder and feed filament to feeding mouth. Show as pics: Install filament holder at the Press down the sliding right back side pressure block on the left of frame side of the feeding component, and then put...
-
Page 16: Trial Printing
----3D Printer User Guide Click [IN] once nozzle temp. reach 200 ℃ When the filament comes out of the nozzle, loading is completed. 4.5 Trail printing 1) Model loading: Select and load the 3d file you want to print, or drag it directly into the software window. Click “Open File”... -
Page 17: Filament Replacement Notes
Save the file 3) Insert the USB stick into the USB port on the A3S, and then click "PRINT" on the Main Menu , choose the 3D Gcode file. Click "START" and the A3S will preheat automatically. When the temperature of then nozzle reaches the temperature you set in the software, the model printing will begin and run until it is finished. -
Page 18: Common Problems And Solutions
----3D Printer User Guide 5. Common problems and solutions Item Problem description Reason Solution A. Replace filament before its gone. A. Filament has run out . B. Store filament in air-tight B. Filament was exposed to container when finished printing. moisture, and has become Filament breaks at the Replace with fresh filament... -
Page 19: D Printer Maintenance
----3D Printer User Guide 6. 3D printer maintenance 1. Daily maintenance 1) Before using the machine to print, make observe the safety recommendations. 2) Regularly clean and maintain the equipment. Clean the surface of the nozzle, print bed, moving parts and other parts, to help prevent wear caused by excessive dust. -
Page 20: Supports And Service
----3D Printer User Guide 7. Supports and service 1. Please see the Warranty Card for details on our policies for repair and support. 2. If your printer is malfunctioning or damaged, for your safety, and to avoid further damaging the printer, please contact the after-sale service center or our support team for advice first, before attempting any repair.