Table of Contents
Advertisement
Using Dynamic Objects
9.
Click the Font button to display the Font dialog box:
10. Select the font, style and font size. Click OK to go back to the prior dialog box.
11. Click the Show State Table button to display the Dynamic Messages States Table dialog box:
12. For each State, enter the Range Limit that determines if that state's text message is to be displayed.
The range limit number entered must be larger than the prior state and smaller than each successive
Special Effect
Normal
Blink
Scroll
Description
the message is displayed with no special effects.
the entire message blinks on and off (regardless of
state every 2 sec)
the entire message will scroll across the area set
aside for the dynamic message according to four
settings: Bottom to top, Top to bottom, Right to left,
and Left to right. The Change Interval setting
determines the scroll rate.
93
1010-0300, Rev 02
Advertisement
Table of Contents
