Table of Contents
Advertisement
Creating Your First Project
19
The following illustration shows the various sections of BlueLeaf.
Creating a Sample Project
This section walks you through the creation of a BlueLeaf project named Sample.mpl. Once downloaded to the OIT, this
basic configuration allows the OIT to connect to the PLC, display a startup screen, and display a screen containing one PLC
register monitor when a switch on the startup screen is pressed.
Although we strongly recommend that you perform the following steps to create this sample project, the project is already
included in your BlueLeaf software with the following filename:
SAMPLE.MPL-sample project for the BLU300M
1010-0300, Rev 02
Advertisement
Table of Contents
