How To Display Screens; Jump To Screen Feature - Maple Systems Blue Series Installation And Operation Manual

Creating and Displaying Screens

How to Display Screens

Screens are displayed on the BLU300 using the following methods:
• Configuring the OIT to continuously monitor a PLC register or coil using the 'Jump To Screen' feature
• Configuring a function key to display a new screen
• Use the up/down arrow keys to scroll through the screens
• Using the System Parameter Setting in the Global Settings menu

Jump to Screen Feature

The 'Jump To Screen' feature is used to configure a PLC coil or register that the OIT will continuously monitor for a
condition. If that condition is met, then the OIT will display the assigned screen. There are two 'Jump To Screen' editors:
the Local and Global editors. The Global Jump To Screen feature is used to configure a PLC coil/register that will be
monitored by the OIT regardless of which screen is currently being displayed. The Local Jump To Screen feature is used to
configure a PLC coil/register that will only be monitored by the OIT when that screen is displayed.
4
To create a 'Jump To Screen' object
1. To use the global object, from the
object, click the
Settings dialog box appears:
2. Click on the type of PLC memory you wish to use under Screen Condition: Bit or Value (16 or 32
Bits).
GLOBAL SETTINGS
menu, then Jump To Screen. The Jump To Screen
LOCAL SCREEN SETTINGS
menu, select Jump To Screen. To use the local
69
1010-0300, Rev 02