108
4
To create a Global Function Key
1.
From the
dialog box appears:
2.
Click on the function key (F1 thru F10, up, down, left r right) that you wish to configure. Note:
F6-F10 correspond to shift F1-F5 keys. Configure the parameters for the function key per type used.
When finished, click the Set button, then define the next function key or click the Close button. Use
the Clear button to clear a particular function key or the Clear All button to erase settings for all
function keys.
1010-0300, Rev 02
menu, click Function Key Editor. The Global Function Key Editor
GLOBAL SETTINGS
Blue Series Installation & Operation Manual