Safety Precautions - Maple Systems Blue Series Installation And Operation Manual

8

Safety Precautions

Please observe the following precautions when installing the Blue Series OIT. Failure to comply with these restrictions
could result in loss of life, serious personal injury, or equipment damage.
Warning:
dusts.
Warning:
the OIT.
Warning:
You may cause malfunction or permanent damage to the OIT.
Warning:
circuitry to the programmable logic controller. Severe voltage spikes caused by these devices may
damage the OIT.
1010-0300, Rev 02
Do not operate the OIT in areas subject to explosion due to flammable gases, vapors, or
Do not connect the OIT to an AC power source. You will cause permanent damage to
Do not attempt to use a DC power supply that does not meet OIT power requirements.
Do not power the OIT with a DC power supply used for inductive loads or for input
Blue Series Installation & Operation Manual