Chapter 12 - Using A Memory Stick; Copying A Project From The Blu300 To The Pcc - Maple Systems Blue Series Installation And Operation Manual

Using a Memory Stick
The BLU300 Series supports the ability to quickly download/upload a project using a memory stick called the Program Copy
Card (PCC). The PCC (Maple P/N 7902-0001) is an optional accessory for the BLU300 which reduces the time required to
download a project into the BLU300:
PCC (Maple P/N 7902-0001)

Copying a project from the BLU300 to the PCC

1. Remove power from the BLU300.
2. Set the switch on the memory stick (PCC) to BLU®PC.
3. Insert the memory stick (PCC) into the extension slot in the back of the BLU300 with the slot guide
face up.

Chapter 12 - Using a Memory Stick

133
1010-0300, Rev 02