Safety Warnings - Mira MYLINE Installation & User Manual

SAFETY WARNINGS

Mira thermostatic mixers are precision engineered
and should give continued safe and controlled
performance, provided:
1. They are installed, commissioned, operated
a n d m a i n t a i n e d i n a c c o r d a n c e w i t h
manufacturer's recommendations.
2. Periodic attention is given, when necessary, to
maintain the product in good functional order.
Caution!
1. Read all of these instructions.
2. Retain this guide for later use.
3. Pass on this guide in the event of change of
ownership of the installation site.
4. Follow all warnings, cautions and instructions
contained in this guide.
5. Anyone who may have difficulty understanding
or operating the controls of any shower should
be attended whilst showering. Particular
consideration should be given to the young,
the elderly, the infirm or anyone inexperienced
in the correct operation of the controls.
6. Rapid/Excessive movement of the flow and/
or temperature control levers may result in
momentary unstable blend temperatures.
7. Care is required when adjusting flow or
temperature. Make sure that the temperature
has stabilised.
8. Do not remove or tighten the body grubscrews.
Caution! Do not remove or
tighten these grubscrews.
9. Care must be taken when positioning the
thermostatic mixer. Make sure that there is
sufficient headroom and ceiling clearance to
install the integral slidebar and Showerhead.
10. When this product has reached the end of its
serviceable life, it should be disposed of in a
safe manner, in accordance with current local
authority recycling, or waste disposal policy.
4