Getting Started - Agilent Technologies 6400 Series Quick Start Manual

Getting Started

Install the Triple Quadrupole LC/MS hardware and software
Use the Installation Guide to install the hardware and software and verify
performance.
Set up, run, and analyze samples
The roadmap below shows you the steps to set up and run a batch of samples from
start to finish. Follow the instructions on the next pages to get started and to learn
where to find the information to help you with each step in this roadmap.
Agilent 6400 Series Triple Quadrupole LC/MS Quick Start Guide
1
Start the
Start
Data
Acquisition
Here!
software.
Set up, run
and analyze
samples
6 5
Analyze data
Review
with
results with
Quantitative
Qualitative
Analysis.
Analysis.
2
Prepare the
LC modules.
3
Prepare the
Triple Quad
instrument.
4
Set up and
run an
acquisition
method.
Getting Started
5